Tecfluid TH5 For DP Series Uživatelský manuál

SC / SCH / SCV / SM / DP / LP Transmitters HALLTEC V TH5, TH5T, TH5H, TH5TH For Series R-MI-TH5 Rev.: 1 English version instrumentation for fluids

The marking of the equipment shows the following characteristics: - Manufacturer - Model - Serial number (year of construction and number) - CE marki

Problem Probable cause Remedy The analog output gives always 0 mA Cables disconnected. Check the cable connection. The pointer rubs on the scale

WARRANTY Tecfluid S.A. GUARANTEES ALL ITS PRODUCTS FOR A PERIOD OF 24 MONTHS, after consignment, against all defects in materials and workmanship. Thi

2 TABLE OF CONTENTS 1 INTRODUCTION ... 3 2 MODELS ...

3 1 INTRODUCTION The Halltec V transmitter is an electronic position transducer with a microprocessor. The instrument uses the Hall effect to capture

The connection is made in the terminal block. The positive terminal of the power supply is connected to the position + and the positive terminal of th

5 Note: The reset terminals are not isolated from the rest of the circuit. They may not be connected to other equipment. Example of the connection of

In order to establish HART TM communication, it is necessary to connect a terminal or PC with a HART TM modem, in one of the points indicated in the f

Resume of the principal communication characteristics: Manufacturer, Model and Revision Tecfluid S.A., TH5H, Rev. 0 Device type Transmitter HART r

9 LP SERIES Since LP series are level measuring instruments, they will be available only with TH5 and TH5H models. For HART TM communication, the meas

Maximum frequency: 2 Hz. Pulse duration: Aprox. 250 ms. Totalizer: 8 digits. (7 + one decimal. Reset by means of potential free contact). 10.3